Process pipe and CHS components
directly from 3D CAD models

Mitre cuts on pipe
Mitre cuts on pipe
Weld preps on square cuts
Weld preps on square cuts
Holes at any location on pipe
Holes at any location on pipe
Diagonal pipe cut-through
Diagonal pipe cut-through
Notches on pipe for cleats
Notches on pipe for cleats
Square up pipe
Square up pipe
Angled saddle cope
Angled saddle cope
Saddle cope
Saddle cope

Advanced pipe cutting system

Pipe and Circular Hollow Section (CHS) can easily be cut on the Metaltek XB1200. Simply import the 3D models into the controller and they will be  nested into their appropriate materials and incorporated into the job queue. Cutting processes are completely automated. If you can draw it then the XB1200 can cut it.

Cut directly from 3D Models

STL files can be exported from almost all 3D CAD programs. Simply open them and cut. Bevels and weld preps are supported. Part numbers can be automatically etched.

NC1/DSTV Compatible

Pipe files can be cut from NC1 files exported from steel detailing software. (Note some industry software can produce poor quality NC1 files for pipe)

DXF file support

2D CAD pipe developments can be cut directly through the import of DXF files. (Correct formatting is required). Supports etching of part numbers etc.

Pipe rotation is fixed

Because the pipe is always clamped by one of the jaws, there is no risk of rotation or losing alignment during cutting.

Heavy duty capability

Heavy duty pipe can be processed up to 40mm wall thickness with up to 45 degree bevels.

DXF file support

2D CAD pipe developments can be cut directly through the import of DXF files. (Correct formatting is required)

Cutting 328mm diameter CHS

Complex pipe joints with weld preps
Structural tubing intersections

Cutting 610mm pipe
End cuts in 610mm pipe with slots for cleats
Various end cuts on CHS

Home Page